Product Type:

Blue Tops RF Modules

Description:

Our Blue Tops RF Modules are RF system building blocks with verified state-of-the-art phase noise performance and exceptionally low harmonic and spurious content. These modules enable RF systems designers to quickly configure frequency generating systems with low noise outputs to 16 GHz.

Each module contains all the components required to achieve a given function integrated into a single, compact aluminum case. The Blue Tops Series includes amplifier, multiplier, divider and phase lock loop modules, mixers, filters, splitters and power level detectors, most with fast deliveries and low cost.

: IFM Series multipliers offer low noise and excellent spectral purity performance with outputs to 16 GHz. Internal voltage regulation and multiple outputs are options.

: Complete system using Quantic Wenzel oscillators, Blue Top RF Modules and other components to provide a low noise multi-frequency rack-mounted chassis.

: Small plate assembly using Blue Tops RF Module to phase lock a 100 MHz ULN to a 5 MHz ULN.

: Low Noise RF building blocks including amplifiers, multipliers, dividers and more for frequency generation to 16 GHz.

: Blue Tops RF Modules used to generate multiple frequencies in a complex sub-assembly.

: Blue Tops RF Modules used for frequency distribution and output level monitoring in a rack mounted system.

Model	Description	Application	Phase Noise (100 kHz)	Size
Directional Coupler (LNDC)	Low Noise Directional Coupler (LNDC) Input Frequency from 5 MHz to 1 GHz, fixed Integral Coupler, Amplifier and Attenuators Input Level: +10 dBm, minimum Output Level (Main Line): 1.5 dBm < Input Level Output Level (Coupled Line): To +20 dBm (Consult Factory) Port-to-Port Isolation: 20 dB, typical Intrinsic Phase Noise Floor to -165 dBc/Hz (Input Referred) Current Draw: 80 mA, typical Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			1.25 x 1.25 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Integrated Mixer (LNIMX)	Low Noise Integrated Mixer (LNIMX) Mixer Selected Based on Frequencies Required Integral Attenuators to Adjust Levels as Required LO Frequency Range – Up to 3.4 GHz, fixed RF Frequency Range – Up to 2 GHz, fixed Output Frequency: Up to 2 GHz (Raw Unfiltered Sum, Difference and Originals) Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			2.5 x 1.5 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Low Noise Mixer (LNMX)	Low Noise Mixer (LNMX) Standard Mixer – M/A COM P/N: M8TH Integral Attenuators to Adjust Levels as Required Frequency Range – RF: 1-3400 MHz Frequency Range – LO: 1-3400 MHz Frequency Range – IF: 1-2000 MHz LO Power: +23 dB, nominal Conversion Loss: 8.0 dB, typical Isolation: L-R, 35 dB; L-I, 35 dB ; R-I, 21 dB Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			1,25 x 1,25 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Phase Lock Loop (LNPLL)	Low Noise Phase Lock Loop (LNPLL) Input Frequency from 5 MHz to 150 MHz, fixed Integral Phase Detector, Amplifiers, Detectors and VReg Type 1 or 2 Loop Options Loop Bandwidth Optimized for Individual Application Lock and Rail Detect Monitoring Options (TTL) Current Draw: 100 mA Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			2.55 x 2.55 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Power Splitter (LNPS)	Low Noise Power Splitter (LNPS) Input Frequency from 5 MHz to 2 GHz, fixed Integral Splitter and Attenuators Flexibility in Setting Gain and Input/Output Levels Input Level: Up to +15 dBm Insertion Loss: ≤ 3.5 dB Port-to-Port Isolation: ≥ 20 dB Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			1.25 x 1.25 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Signal Translator (LNST)	Low Noise Signal Translator (LNST) Input Frequency from 5 MHz to 160 MHz, fixed Integral Waveform Converter, Amplifier and Filters Sine-to-Square and Square-to-Sine Options Available Sine, TTL, LVTTL, LVDS, and Others Current Draw: 150 mA, typical Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			2 x 1.25 x 0.8"

Model	Description	Application	Phase Noise (100 kHz)	Size
Voltage Regulator (LNVR)	Low Noise Voltage Regulator (LNVR) Input Voltage from +5 VDC to +28 VDC, fixed Input Voltage Tolerance: Up to 10% Output Voltage from +2.5 VDC to +25 VDC, fixed Output Current Draw: ≤ 1 Amp, typical (Consult Factory) Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard			1.75 x 2.5 x 1"

Model	Description	Block Diagram	Size
Power Level Detector (TLPD)	Through-Line Power Level Detector (TLPD) Input Frequency from 5 MHz to 2 GHz, fixed Integral Coupler, RMS Detector or Optional Comparator Input Level: -5 dBm to +20 dBm, fixed Monitor Window: Up to ±10 dB (relative to input power level) Output (RMS Detector Option): 0 to +5 VDC, typical Output (Comparator Option): TTL Compatible (5V) Insertion Loss: 1 dB, typical @ 500 MHz Current Draw: ≤ 30 mA Nickel-Plated Machined Aluminum Housing SMA(f) Input and Output Connectors, Standard		1.25 x 1.25 x 0.8"

Oven Controlled(OCXO)

Phase Lock (PLO)

Low G-Sensitivity

Vibration Isolated

Sub-Assemblies

Instruments

Standard Frequency Sources

Custom Frequency Sources

Oscillator Based

Frequency Conversion

RF Modules

HI-REL/MIL

Space Oscillators

Custom Space Frequency Sources

Product :
Blue Tops RF Modules

Product Type:

Blue Tops RF Modules

Description: