The LNAF is a broadband amplifier that is characterized to a specific customer specified frequency within the operating band with an integrated lowpass filter. The LNAF’s integral 5-section LPF attenuates unwanted harmonics and other undesired signals at the output after amplification. A wide selection of common amplifiers and input/output attenuators provide flexibility in configuring gain and input/output levels (see amplifier selection table for options). Residual phase noise is verified at 100 MHz unless otherwise specified. Please consult our technical staff for assistance in configuring an amplifier to suit your input and output requirements.
Low Noise Amplifier Filter
RF Signal Amplification and Harmonic Suppression
Input Frequency from 5 MHz to 2 GHz
Intrinsic Phase Noise Floor to -178 dBc/Hz (Input Referred)
Integral 5-Section Lowpass Filter: Harmonics: ≤ -50 dBc
Integral Attenuators for Flexibility and Customized Options
Gain: Up to +22 dB on some models
Output Level P1dB: Up to +26 dBm on some models
Nickel-Plated Machined Aluminum Housing
SMA(f) Input and Output Connectors, Standard
** These part numbers are a few common configurations. Use the Ordering Information guide and the
Amplifier Selection Table for additional amplifier options or consult the factory for assistance.
*** See the complete Amplifier Selection Table for additional amplifier options.
Amplifier Selection Table
